911 Carrera 4 (997) F6-3.6L (2007)
Power Distribution Module: Service and Repair
Removing and Installing Vehicle Electrical System Control Unit
Removing And Installing Vehicle Electrical System Control Unit
Preliminary work
Preliminary work - vehicle electrical system control unit
Detach relay carrier 1.
Removing vehicle electrical system control unit
WARNING:
Risk of damage to electronic control modules.
-
If care is not taken, electrical and electronic components may be destroyed.
-
Before removing the control module, switch off the ignition and remove the ignition key.
1. Pull apart the locking tabs -A- for the vehicle electrical system control unit, pull the control unit forward and down with connectors still attached
then pull it out of its holder at the rear.