911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.
-
Select 'Summer/winter time' in the PCM2 MMI coding function selection and confirm with the [>>] key.
-
Code the selection required with the [F8] key.
-
timeout
-
Traffic broadcast
You can use this menu item to code the
loudspeaker boost
traffic broadcast loudspeaker boost in the PCM2.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control modules menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.
-
Select 'Traffic broadcast loudspeaker boost' in the PCM2 MMI function selection and confirm with the [>>]
key.
-
Code the selection required with the [F8] key.
-
Time
Using this menu item, you can code the current time.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control modules menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.
-
Select 'Time' in the PCM2 MMI coding function selection and confirm with the [>>] key.
-
Use the arrow keys to select the required 'Time' and code with the [F8] key.
-
Time zone
Using this menu item, you can code the required time zone.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control modules menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.
-
Select 'Time zone' in the PCM2 MMI coding function selection and confirm with the [>>] key.
-
Select the required 'Time zone' and code with the [F8] key.
Coding Table (Part 1)