911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-1493008.png)
11.
Reinstall molded foam piece in the door lock area.
12.
Thread the hook of the bowden cable into the inner actuating mechanism from underneath (Figure 5, arrow 1).
12.1 Pull on the end piece of the cover until the hook moves freely.
12.2 Thread the end piece into the support bracket of the inner actuating mechanism and push forward until it engages (Figure 5).
13.
Install door panel, see the 911 Carrera (996) Technical Manual, Section 70 59 37 - Disassembling and assembling door trim panel.
14.
Reconnect the battery. Enter radio code if necessary.
