911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-1499002.png)
2. Disconnect the electrical plug connection.
3. Unscrew the fastening screws and disengage the cable.
Installing Lid Release Motor
1. Engage the cable and position the motor at the holder.
2. Screw in the fastening screws. Tightening torque: 1.5 Nm (1 ftlb.).
3. Position the holder with the motor on the retaining strip and screw tight with the fastening nuts. Tightening torque: 9.7 Nm (7 ftlb.).
Install front bumper.
