911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
70 18 37 - Disassembling and assembling instrument panel
Disclaimer
Work Procedure
1.
Preparatory work.
1.1
Remove battery cover. Disconnect and cover the battery.
1.2
Remove radio, both switch covers and the electrical heating/air-conditioning regulator (Technical Manual, Group 7, Serv. No. 7018).
1.3
Remove both side covers (footwell area) on the center console (Technical Manual, Group 6, Serv. No. 6817).
1.4
Remove CD/cassette or oddments tray and the center console.
1.5
Lay and affix the connection lines for the radio into the lower DIN1 slot so that it cannot be chafed (Figure 3, Item A).
1.6
Lay the connection lines for the electrical heating/air-conditioning regulator.
1.6.1 Lead the lines back along the course beneath the instrument panel, to a length of approx. 20 cm.
1.6.2 Lay the lines next to the center console into the center console holder (Figure 3, Item B).
1.6.3 Guide the plug-in couplings individually from behind through the opening in the holder (Item B) towards the shift lever.
2.
Install both cupholders into the retaining frame (Figure 2, Item D).