911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
5
-
Removing seals and retaining bracket at sides of roof frame?
The seal on the roof frame consists of two parts.
1. Pull the lower seal -5- out of the profile of the retaining strip -7-.
2. On the upper seal -6- with the retaining rail -7-, unscrew the Torx screws T15 -8- and remove the seal -6- and the retaining rail -7- from the
roof frame.
6
-
Removing retaining rail and convertible-top seal on roof frame 1
1. Unscrew and remove the Torx screws T25 -9- from the retaining rail -10-.
2. Unscrew the Torx screw T25 -11- from the convertible top seal -12-.
3. Pull left and right convertible top seal -12- out of the roof frame 1 towards the front in -direction of arrow-.
7
-
Removing convertible-top covering at sides of roof frame 1
-
Unscrew the fastening screws -13- from the roof frame -15-, lift the shaped sheetmetal part -14- with convertible-top covering.