911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
2
-
Installing roof frame 2
NOTE: Use assembly grease when fitting the pins.
1. Insert bushing -4- 10x12x15 into the bore on the outer side of roof frame 2 -5-.
2. Position roof frame 2 -5- on the convertible-top support -1- and connect with pin -6-. Secure the pin -6- with the retaining clip -7- SLB 10.
3
-
Installing roof frame 3
NOTE: Use assembly grease when fitting the pins.
1. Insert bushing -4- 10x12x15 into the bore on the inner side of roof frame 3 -8-.
2. Position roof frame 3 -8- on the convertible-top support -1- and connect with pin -9-. Secure the pin -7- SLB 10 with the retaining clip -9-.
4
-
Installing roof frame 1
NOTE: Use assembly grease when fitting the pins.
1. Insert bushing -10- 8x10x5.5 into the bore on the outer and inner side of roof frame 2 -5- and roof frame 3 -8-.
2. Position roof frame 2 -5- and roof frame 3 -8- on roof frame 1 -11- and connect with the pin -12- and -13-. Secure the pin -7- SLB 10 with
the retaining clip -12, 13-.