911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-1605006.png)
-
Pull out the connector springs -B- on the gate and push in sliding/tilting roof trim. Push inner panels under the sheetmetal panel of the
sliding/tilting roof trim.
-
Position the sliding/tilting roof trim -dimension A- approx. 80 mm in front of the roof edge cut-out.
-
Engage the left and right-hand inner side panels in the sliding/tilting roof trim. Repeat the procedure for installing the sliding roof panel.
