911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-498006.png)
View of the supply hose on the engine
7. Open the heating lines on the vehicle floor. To do so, open the hose clamp, pull off the lines and drain. Then clean the inside and outside of the
hoses, connect the hoses again and tighten the hose clamps. Install the hose clamps and check that the lines are seated correctly.
8. Install drain plug on the engine with a new sealing ring and tighten. Tightening torque: 10 to 15 Nm (7.5 to 11 ft. lbs.).
Filling cooling system (includes bleeding)
1. Screw lid adapter for coolant expansion tank (K 22) onto the expansion tank.
2. Connect the flexible extension (Fz 100) to the lid.
3. Connect the vacuum pressure gauge of the bleeder tool to the flexible extension. When doing so, ensure that both shutoff valves are closed
(positioned 90° to flow direction)
