911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-449007.png)
5. Put on oil hose of the oil pressure sensor and tighten the union nut -1- with an a/f 19 open-ended wrench. Always counter at the hexagon of the oil
filler neck holder -2- with an a/f 22 open-ended wrench when doing this.
6. Fit holder of the oil filler neck. Tighten the three M6 screws -arrows- for this purpose. Do not forget the ground cable.
Tightening torque 10 Nm (7.5 ftlb.)
7. Push on plug of the idle speed positioner -arrow-.
