911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-459003.png)
1. Remove any burred spots with a nail file, then pull off with a fine abrasive or polishing cloth.
Illustration shows rounded edges on the 13590005 recesses in the centering piece.
Illustration shows surrounding edge of 13590004 centering piece. The surrounding edge must not be damaged.
2. Fasten assembly sleeve of special tool 9609.
3. Lubricate crankshaft journal and assembly sleeve.
Note: The micro sealing lip of the sealing ring must neither be touched by hand nor lubricated.
4. Put on sealing ring by hand. Do not lubricate outer diameter of sealing ring, do not use sealant, it must be fitted dry.
5. Fit crankshaft sealing ring. Insert sealing ring as far as it will go using the insertion tool, which consists of the special tools 9609 and 9609/1.
