911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-577003.png)
2. Adjust tail pipe until the upper edge of the tail pipe is horizontal and sits parallel to the rear spoiler.
3. The tailpipe must have an even distance to the rear panel. The dimension -A- must be 22 mm.
4. Tighten the fastening nuts of the tailpipe clamp to 30 Nm (22 ftlb.).
5. Loosen the tightening nut on the underside of the tailpipe.
6. Move the tailpipe until the projection from the body -Dimension B- is 7 to 10 mm.
