911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-1333001.png)
Discharge Air Temperature Sensor / Switch: Service and Repair
Removal
1. Remove footwell bulkhead. Unclip center console cover at the front and remove the toot- well vent (3 screws).
2. Turn blower outlet sensor by 90 ° and pull it out.
3. Pull electrical plug connection off blower outlet sensor.
Installation
1. Position temperature sensor on the heating/air-conditioning unit housing and turn by 90 ° (tighten).
2. Engage electrical plug connection and route wire carefully.
