911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-724011.png)
Steps 6-17 refer to the adjacent Figure
16. Connect plug connection to central intake distributor -3-.
17. Clip switch-over valve of the tank ventilation -4- into the plastic clip and connect cable plug.
18. Install throttle body. To do so, position the throttle body with new sealing ring and tighten the four M6 x 25 hexagon-head bolts. Fit cable plug to
the throttle body.
19. Install air cleaner housing.
NOTE: Note the work instructions for disconnecting and reconnecting the battery.
20. Connect the battery.
21. Check fluid levels (coolant and Pentosin) and fill in, if necessary.
22. Remove protective covers from rear of vehicle.
