911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-743002.png)
Installation
1. Engage cable guide into the bracket. Then pull slightly to ensure that the connection is properly locked.
2. Fasten the accelerator pedal.
Tightening torque of the countersunk screw (M5 x 55) 2.8 Nm ± 10 % (2.0 ftlb. ± 10 %)
3. Engage cable in the cable disc, insert the pedal encoder in the stud and fasten with two hexagon nuts.
Tightening torque 8 - 9 Nm (6.0 - 6.5 ftlb).
4. Fit air duct.
