![]() |
Porsche Workshop Manuals | |
911 Carrera 4 Cabriolet (996) F6-3.4L (1999)Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Module, (Vehicle Antitheft) > Component Information > Technical Service Bulletins > Alarm System Control Unit - Revised Return Procedure![]() Alarm Module: Technical Service Bulletins 911 (996) 5/01 9687 4-19-01 Binder - Group 8/9 - Air Conditioning, Electrics Alarm System Control Unit Vehicle Type: Model Year: Equipment: Alarm system Immobilizer/central locking Concerns: Alarm system control unit Information: Alarm system control units are being returned to the service test center as warranty goods. Control units that were subject to complaint and delivered to The previous procedure has shown that it is not possible to perform an exact evaluation of the control unit during examination without more details about From now on, a working log must therefore be included with an alarm system control unit that was subject to complaint when it is returned to the service CAUTION! Faulty or wrong data in tile working log if the correct procedure is not followed during repair. > Always produce the working log with the Porsche System Tester 2 (PST2) before beginning with the repair work. > For the log, the following data are required as a paper printout from vehicle diagnosis: - Identification, including. additional information - Fault memory, including. additional information - Event memory - Activation status memory > Control units without a complete working log will not be accepted by the warranty test center. Procedure: Procedure for producing the working log: 1.1 Connect PST2 to the diagnostic socket; switch on the PST2. 1.2 When the PST2 is ready for operation, select the vehicle type from the start menu. 1.3 Start the automatic control unit search and wait until the search is complete. 1.4 Use the "F6" key to delete the working log stored in the PST2. 1.5 Select "Alarm system" in the "Control units" menu. 1.6 Select "Identification" in the "Function selection" menu. Save with the "F4" key. Have information displayed with the "F8" Info key. Save the Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Module, (Vehicle Antitheft) > Component Information > Technical Service Bulletins > Alarm System Control Unit - Revised Return Procedure | ||
[NEXT PAGE] |