911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
Differential Cover: Service and Repair
Removing and installing cover for final drive
Tools
Removal
1. Remove final drive.
2. Drain oil.
3. Press out flanged shaft with two mounting levers.
4. Unscrew fastening screws for the lid and remove the lid by tapping it with a plastic hammer.
Installation
Install in reverse order, observing the following points:
1. Fit sealing ring without twisting and coat it with Vaseline.
2. Fit lid carefully and tighten screws uniformly in diagonally opposite sequence. Use special tool 9321 to aid assembly.