911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
Installation
1. Fill the space between the dust and sealing lips with grease (e.g. Liqui - Moly) and drive in the sealing ring up to the mounting face using special
tool 9252.
2. Always replace the snap ring for the halfshaft flange. To do this, clamp the flange in the vice with protective jaws and press out the snap ring with
the new snap ring "A".
3. Grease the snap ring well and drive in the halfshaft flange using the special tools P254 and 9247/1.
Sealing Ring For Limited-Slip Differential
Sealing ring for limited-slip differential -- Removing and installing halfshaft flange