911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
4. Insert B+ wire into the slot of the rubber sleeve and press sleeve into the body opening.
1 - B+ wire
2 - Rubber sleeve
3 - Shift and selector cables
5. Fasten shift and selector cables on support bracket (A/B) and on transmission lever (1/2).
1 - Selector cable (blue)
2 - Shift cable (black)
6. Install transmission support and cross member.
7. Install parking brake console.
Information
^
The shift and selector cables are routed underneath the console.
8. Fasten shift and selector cables on the shift console:
-
Fit support bracket sleeves (5) in the correct position. It must be possible to hear and feel them engage.
-
Engage shift and selector cables in the open adjusters (3) and close the adjusters (see enlarged view). The locking sleeves must move to the end
position automatically.
1 - Selector cable (blue)