911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
Impact Sensor: Service and Repair
Removing and Installing the Triggering Unit For the Airbag
696319 Removing And Installing The Triggering Unit For The Airbag
Removing triggering unit for airbag
WARNING: Danger of injury and damage to property as a result of incorrect handling of airbag units! Please observe the following points:
-
The airbag triggering unit must not be removed with the plug plugged in.
-
Waiting time following ignition off (battery disconnection) and detachment of the plug connection during work on the airbag system at
least 1 minute.
The ignition unit is located above the centre console.
1. Remove ignition key.
2. Disconnect the battery and cover terminal or battery.
3. Unclip front cover of the centre console on the left and right.
Fold up the safety bracket from the driver's side.
4. Disconnect the plug connection from the ignition unit.
5. Undo the shear-off nut with a socket wrench insert 9259.