911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-3001.png)
Central Control Module: Service and Repair
Removing And Installing Gateway Control Unit
Tools
Preliminary work
Preliminary work for gateway control unit
Cover of driver's footwell:
Remove relay carrier 1
Remove vehicle electrical system control unit.
General warning notes
General warnings for gateway control module
WARNING:
Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
-
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
Removing gateway control unit
INFORMATION: The gateway control module is located under the radiator tank, accessible from inside the vehicle near to the driver.
WARNING:
Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
