911 Carrera 4 Coupe (996) F6-3.6L (2002)
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control module menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.
-
Select 'Date' in the PCM2 MMI coding function selection and confirm with the [>>] key.
-
Use the arrow keys to select as required and code with the [F8] key.
-
Units
Using this menu item, you can code the relevant units.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control modules menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.
-
Select "Units" in the PCM2 MMI coding function selection and confirm with the [>>] key.
-
Select "the relevant units" from the menu item that is displayed and code them with the [F8] key.
-
Vehicle type
Under this menu item, the PCM2 MMI
vehicle coding
corresponding to the vehicle type can be coded.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control module menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.
-
Select 'Vehicle type vehicle coding' in the PCM2 MMI coding function selection and confirm with the [>>]
key.
-
Select "911 (996)" in the menu and code with the [F8] key.
-
Vehicle version
Under this menu item, the PCM2 MMI
vehicle coding
corresponding to the vehicle version can be coded.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control module menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) PCM2 MMI function selection and confirm with the [>>] key.
-
Select "Vehicle version" in the PCM2 MMI coding function selection and confirm with the [>>] key.
-
Select the relevant version "Coupe, Cabrio, Targa" in the menu and code with the [F8] key.
-
Right/left-hand
Under this menu item, the PCM2 MMI
drive vehicle Coding
corresponding to the vehicle version can be coded.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control module menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) PCM2 MMI function selection and confirm with the [>>] key.
-
Select "Right/left-hand drive vehicle coding" in the PCM2 MMI coding function selection and confirm with the
[>>] key.
-
Select 'Right/left-hand drive vehicle coding' in the Modify PCM2 coding menu and confirm with the [>>] key.
-
Select "Right or left-hand drive" in the menu corresponding to the vehicle equipment and code with the [F8]
key.
-
GAL(noise-dependent
Using this menu item, you can code
loud-speaker boost - NLB)
the NLB as required.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control modules menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.
-
Select 'NLB' in the PCM2 coding function selection and confirm with the [>>] key.
-
Select 'Value' corresponding to the desired volume and code with the [F8] key.
-
Country coding
Using this menu item, you can code the country code.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM' in the Control modules menu and confirm with the [>>] key.
-
Select 'PCM2 MMI' in the PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the PCM2 MMI function selection and confirm with the [>>] key.