911 Carrera 4 Coupe (996) F6-3.6L (2002)
The foam coating of the A-pillar support sections must be pressed against the cowl panel frame trim.
1. Unscrew the adjusting element -2- in the direction of the arrow -Y- until the foam coating of the A-pillar support sections on the left and right -A,
B- are pressed against the cowl panel frame trim.
2. Screw the lock nut -1- in the direction of the arrow -X- as far as it will go against the adjusting element -2- and lock it against the adjusting
element -2-.
Assembly Instructions For The Rear Trim, The Floor Covering And The Closure Caps