911 Carrera 4 Coupe (996) F6-3.6L (2002)
5
-
Assembling mount at the front left and right
NOTE: The increased collar -arrow- of the sliding block must always face upwards.
1. Insert the sliding block -2- into the mounting plate -1-. Insert mount slide -3- into the sliding block -2-.
6
-
Installing frame for sliding roof cover
-
Refer to "Installing frame for sliding roof cover"
7
-
Installing electric motor for sun blind
-
Refer to "Installing left electric motor for sliding roof"
-
Refer to "Installing right electric motor for sliding roof"
8
-
Installing lid hinge
-
Position lid hinge -4- on roof module frame and tighten with fastening nuts -5-.
9
-
Installing seal for cover of rear window
-
Push seal -6- all the way round the flange of the roof module.