911 Carrera 4 Coupe (996) F6-3.6L (2002)
1. Turn shop-made extractor into center of piercing point of closure cap and pull off the cap.
Diagram shows upper closure cap
Diagram shows lower closure cap
Installing Camshaft - Engine Removed - Includes Adjusting Timing
Installing Camshaft - Engine Removed - Includes Adjusting Timing
Engine type M 96/03
CAUTION: When working on the engine, absolute cleanliness is essential. An engine cover should be used on the engine assembly support (see
Workshop Equipment Manual, No. 165). Lay removed engine parts on a clean base and cover them without fail. Even the smallest particles of dirt can
block up oil bores.
Requirements
-
Engine completed except for the cylinder heads
-
Flat-base tappet housing installed
Installing Camshafts - Cylinder Bank 4 -6