911 Carrera 4 Coupe (996) F6-3.6L (2002)
![background image](/porsche/911_carrera_4_coupe_(996)/f6-3.6l/Page-317004.png)
Removing valve tappets of cylinder bank 1 - 3
1. Move camshafts of cylinder bank 1 - 3 to basic position. Turn crankshaft clockwise until the bore 1 OT (top dead center) in the belt pulley is
aligned with the fixing bore on the crankcase. Position or fix with fixing pin (short) of special tool 9595 or 9595/1.
2. Pull off closure caps of cylinder head 1 - 3 - flywheel side. Turn shop-made extractor into center of piercing point of closure cap and pull off the
cap.