911 Carrera 4 Coupe (996) F6-3.6L (2002)
-
Unplugging the control unit plug connection for the telephone:
-
Remove passengers seat.
-
Removing control unit holder for telephone.
-
Removing And Installing Optical Contacts On Connector Side
1. Open the secondary locking with the press-out tool. Insert the tool in the opening provided and lift the locking. The locking engages in the
upper position.
2. Place the tool on the primary locking and lift the locking.
-
-A- Optical contact, grey
-
-B- Optical contact, black
3. Pull LWL, e.g., -B- carefully in the -direction of the arrow-. If it is not possible to pull out the LWL, check again if the secondary locking is
completely released and if the primary locking is raised sufficiently.
-
Visual inspection of lockings, connector housing, and contacts for possible damage and if necessary, exchange the damaged parts.
-
Installing Optical Contacts On Connector Side
-
Remove the dust boot right before plugging.
-
Check the proper condition of the contact.
1. Insert the optical contact -B- in the connector until it engages audibly.