911 Carrera 4 Coupe (996) F6-3.6L (2002)
Pin B1 - B18
Connector C, optical waveguide
Pin C1 - C2
External BOSE Amplifier Control Module Function
External BOSE Amplifier Control Module Function
Terminating Resistors On The CAN
A terminating resistor is fitted to each end of the wiring to prevent reflection on the wiring. These terminating resistors are integrated into two control
modules.
CAN Comfort
Communication between the Porsche System Tester II No. 9588 and the MOST control modules only takes place via the K lead to the instrument cluster.
The data is transferred from the instrument cluster gateway to the MOST control modules, via CAN comfort to the PCM2 gateway, via the electrical
MOST in the PCM2 and via the optical MOST outside of the PCM2.
CD Changer (CDC)
The CDC is available as an optional feature and is linked to the PCM2 via the optical waveguide.
Coding Table