911 Carrera 4 Coupe (996) F6-3.6L (2002)
per cent
Using this menu item, you can code the navigation module in accordance with the height/width ratio in percent.
-
Connect and start the Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select 'Height/width ratio in per cent' in the menu corresponding to the vehicle equipment and code with the F8 key.
-
Air conditioning
with/without
You can use this menu to code the navigation module in accordance with the air-conditioning system equipment.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select 'Air conditioning with/without' in the Navigation coding function selection and confirm with the >> key.
-
Select "Air conditioning with/without" corresponding to the equipment in the Modify navigation coding function
selection and code with the F8 key.
-
Country coding
You can code the country code using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select "Country coding" in the Navigation coding function selection and confirm with the >> key.
-
Select "the relevant country coding" from the menu item that is displayed and code it with the F8 key.
-
PCM2 code
You can use this menu item to code the PCM2 code after replacing the PCM2-GW.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the 911 (996) Navigation function selection and confirm with the >> key.
-
Select 'PCM2 code' in the 911 (996) Navigation coding function selection.
-
and confirm using the >> key.
-
Take the PCM2 code from 'IPAS', enter it in the mask and code it with the F8 key.
-
Tyre width
You can code the country code using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the 911 (996) Navigation function selection and confirm with the >> key.
-
Select 'Country coding' in the 911 (996) Navigation coding function selection.
-
and confirm using the >> key.
-
Select 'RoW or USA' in the menu that is displayed and code with the F8 key.
-
Tyre condition
You can code the country code using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the 911 (996) Navigation function selection and confirm with the >> key.
-
Select 'Country coding' in the 911 (996) Navigation coding function selection.
-
and confirm using the >> key.
-
Select 'RoW or USA' in the menu that is displayed and code with the F8 key.
-
Summer/winter time
You can code the summer/winter time using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select 'Summer/winter time' in the Navigation coding function selection and confirm with the >> key.
-
Code the selection required with the F8 key.
-
Time
You can code the current time using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.