911 Carrera 4 Coupe (996) F6-3.6L (2002)
![background image](/porsche/911_carrera_4_coupe_(996)/f6-3.6l/Page-834002.png)
Cutaway view of components
Note: The sealing rings can also be replaced with the transmission installed.
Removal
1. Remove right halfshaft flange. To do this, place a chisel or spacer "A" under the halfshaft flange and pull out the halfshaft flange by turning the
screw "B".
Note: Pull out left halfshaft flange by screwing in the hexagon-head bolts "A" on alternate sides. The bolts must be supported on the rib
reinforcements of the cover (see Figure).
2. Lever out sealing ring using a suitable tool.