911 Carrera 4S (996) F6-3.6L (2004)
In the case of door sealing films which have become partly detached at the top and side, the detached films must be reattached using a butyl sealing cord.
-
Beside the original point of attachment, attach a butyl cord -2- to the area where the door sealing film -1- is detached, and firmly affix.
-
Refer to Materials and tools
Fitting sliding strip on the inner door panel
A sliding strip must be stuck onto the front and rear sides of the inner door panel in order to prevent creaking noises from the door area.
1. Sticking sliding strip onto the front of the inner door panel
1.1. Remove backing film from the sliding strip and stick the strip onto the front of the inner door panel -arrow-. Start at the top (top edge of inner
door panel) and follow the curvature.
2. Sticking sliding strip onto the rear of the inner door panel