911 Carrera 4S Cabriolet (997) F6-3.8L (2006)
/f6-3.8l/Page-505005.png)
4. Before opening the fuel lines, put up or attach to vehicle a warning sign in a clearly visible position.
DANGER:
Fuel can escape when fuel line is disconnected.
-
Risk of fatal injury.
-
Damage to skin.
-
Do not work on fuel system if engine is hot.
-
Do not smoke, avoid fire and naked flames.
-
Wear fuel-resistant protective gloves and goggles.
-
Attach warning sign to vehicle in a clearly visible position.
5. Remove sheetmetal clips of the injection valves and remove the injection valves from the fuel distributor pipe. Ensure that the sealing rings are
present. Because of emerging fuel, place a cloth underneath..
6. Check sealing rings and replace if necessary.
Installing injection valves
Installing injection valves of cylinder bank 1-3
DANGER:
Fuel can escape when fuel line is disconnected.
-
Risk of fatal injury.
-
Damage to skin.
-
Do not work on fuel system if engine is hot.
-
Do not smoke, avoid fire and naked flames.
-
Wear fuel-resistant protective gloves and goggles.
-
Attach warning sign to vehicle in a clearly visible position.
