911 Carrera 4S Cabriolet (997) F6-3.8L (2006)
/f6-3.8l/Page-509003.png)
3. Fit sleeve for filler neck and clip overflow hose onto the holder.
4. Attach ground strap and also connect the rapid-action coupling on the Carrera 4.
5. Secure the filler neck at the relevant pick-up point using an M6 fastening screw (see Installation). - Tightening torque: 10 Nm (7.5 ftlb.).
6. Close the cap.
Subsequent work
1. Install wheel housing liner
2. Mount front wheel. Use special tool socket wrench insert P 300 to avoid damage to the rim.
3. Remove protective covers.
