911 Carrera 4S Cabriolet (997) F6-3.8L (2006)
1. Fill the space between the dust and sealing lips on the new sealing ring with grease, e.g. Liqui-Moly.
Greasing sealing ring
2. Drive sealing ring into the transmission using pressure piece P 9537.
Tapping in sealing ring
3. Replace circlip for the halfshaft flange. To do this, clamp the flange in the vice with a hexagon-head bolt -B- and press out the circlip with the new
circlip -A-.
Replacing circlip
4. Grease circlip for easier fitting.
5. Drive halfshaft flange into transmission using a rubber hammer.