911 Carrera 4S Cabriolet (997) F6-3.8L (2006)
Installing reservoir for windscreen washer system
Connecting the plugs and engaging the tank at the A-pillar
1. Retain the tank in the wheel housing and push in electrical plug connections until plugs are felt to engage.
Installing tank:
2. Engage the windscreen washer tank in the A-pillar and secure with the fastening screw -2-. Tightening torque 15 ftlb.
3. Release water connection for the headlight washer spray nozzles and pull apart.
4. Unscrew fastening screw -2- and pull the tank from the mounting point on the A-pillar.
5. Release the electrical plugs -a- and pull them off.
6. Connect water connection for the headlight washer spray nozzles.
7. Route and engage the water lines to the tank.
Subsequent work
Subsequent work - tank for windscreen washer system
Install front left wheel housing liner.
Install front left wheel.
Install cover of plenum chamber on left.