911 Carrera 4S Coupe AWD F6-3600cc 3.6L SOHC (1997)
Muffler: Technical Service Bulletins
Exhaust Pipe Sound and Optics Package - Fitting
Group
2
Number
9502
Model
6 Cyl.
Part Identifier
2634
September 14, 1995
Subject:
Fitting Exhaust Pipe Sound
and Optics Package
ATTENTION: Service Manager / Service Technician
Models Affected:
911 Carrera and 911 Carrera 4 as of Model Year 1995
General Information:
The above mentioned vehicles can be fitted with an exhaust sound and optics package consisting of:
-
Oval shaped stainless steel exhaust tail pipes With Porsche logo
Parts Information:
000 044 200 01
Exhaust pipe sound and optics package consisting of:
000 044 200 02
Left side tail pipe
000 044 200 O3
Right side tail pipe
Installation:
When fitting the exhaust pipes to the vehicle, be certain the distance between the rear bumper cover and the corresponding tail pipe is approximately 25
mm.
With the package installed, the Porsche logo and the inscription EPD51OO must be readable from below.
Labor Information:
26 34 19 00
40 TU
Remove and install one tail pipe
26 34 20 00
60 TU
Remove and install both tail pipes