1997 Porsche 911 Carrera 4S Coupe Blower Motor Location in Heating and Air Conditioning
11. Push part B into the cutouts.
12. Tighten wing screw (part C) until the blower motor disengages.
13. Pull off connecting wire.
Left-hand blower
14. Detach reservoir from tank.
15. Pull wire off the housing cover. Screw out knurled nut and use a screwdriver to detach retaining clamp from housing cover. Take off housing cover
from above.
16. For further steps, proceed as per items 9 to 13 above.
NOTE: When installing the motor, make sure the blower motor engages correctly and the connection wires are not squeezed.
Check if the blower wheel rotates freely.