911 Carrera 4S Coupe AWD F6-3600cc 3.6L SOHC (1997)
Oil Filter: Service and Repair
Replacing Oil Filter On Engine Housing
1. Remove engine guard. Undo hot-air hose at heating flap box and at air rail and take off hose.
2. Undo hexagon head bolt at crankcase and pull oil pipe out of crankcase. Catch remaining oil in a pan.
3. Undo oil filter with Special Tool 9204.
4. Apply a thin coat of oil to new oil filter. Tighten oil filter manually until seal is seated firmly. To tighten fully, turn by approx. another 1/2 turn.
NOTE: Always replace 0-rings for oil pipe.
Replacing Oil Filter On Thermostat Housing