911 Carrera Cabriolet (996) F6-3.4L (1999)
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control unit menu and confirm with the >> key.
-
Select 'CDR23' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the PCM2 GW function selection and confirm with the >> key.
-
Select 'Vehicle version vehicle coding' in the Coding menu and confirm with the >> key.
-
Select "911 (996)" in the menu and code with the F8 key.
-
Right/left-hand drive
vehicle coding
The CDR23 can be coded in accordance with the vehicle model using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'CDR23' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select "Right/left-hand drive vehicle coding" in the 911 (996) CDR23 coding function selection and confirm with the
>> key
-
Select "Right/left-hand drive" from the menu item that is displayed and code it with the F8 key
The following selection is available:
-
Right-hand drive
-
Left-hand drive
-
Air conditioning
with/without
You can code the relevant vehicle version with or without air conditioning using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'CDR23' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select "Air conditioning with/without" in the 911 (996) CDR23 coding function selection and confirm with the >>
key.
-
Select 'with or without' in the menu corresponding to the vehicle equipment and code with the F8 key.
-
GAL (noise-dependent
loudspeaker
boost - NLB)
You can code the NLB as required using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'CDR23' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select "GAL (NLB)" in the 911 (996) CDR23 coding function selection and confirm with the >> key.
-
Select 'Value' corresponding to the desired volume and code with the F8 key.
-
Country coding
You can code the country code using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'CDR23' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select 'Country coding' in the CDR23 coding function selection and confirm with the >> key.
-
Select "RoW or USA" and code with the F8 key.
-
PCM2 code
It is possible to code the PCM2 code under this menu item after replacing the CDR23.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'CDR23' in the Control units menu and confirm with the >> key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select 'CDR23 code' in the CDR23 coding function selection and confirm with the >> key.
-
Take the PCM2 code from 'IPAS', enter it using the arrow keys and code it with the F8 key.
-
Production mode
You can code the production mode using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'CDR23' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select 'Production mode' in the 911 (996) CDR23 coding function selection and confirm with the >> key.
-
Select 'Production mode ON/OFF' in the CDR23 coding function selection and confirm with the F8 key.
-
Tuner parameters
You can code the tuner parameters using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.