911 Carrera Cabriolet (996) F6-3.4L (1999)
996 537 445 02
New/connection piece
N 908 005 01
Torx screws M 8 x 14 (2 ea. required)
If so equipped:
Part Number
Description
996 555 372 02 ENJ
New/inner door release handle, leather covered
in Graphic Grey
996 555 372 02 ENK
New/inner door release handle, leather covered
in Savanna Beige
996 555 372 02 ENL
New/inner door release handle, leather covered
in Metropol Blue
Tools Required:
Ratchet
Socket wrench TX30
Phillips screwdriver (medium)
Slotted screwdriver
10 mm box-end wrench
Adjustable pliers
Torque wrench 0-50 Nm (0-37 ft. lb.)
Flat-nosed pliers
Plastic spatula
Labor:
Labor Operation
Time Units
Description
57 37 19 20
130 TU
Replacing one inner door release handle
57 37 20 20
220 TU
Replacing both inner door release handles
Both operations include: Removing and
installing door panel, replacing inner release
handle mechanism, bowden cable and
connection piece.
Literature:
911 Carrera (996) Technical Manual, Group 5 and 7, Sections:
57 51 37 - Disassembling and assembling door
70 59 37 - Disassembling and assembling door trim panel
Work Procedure
Replacing inner door release handle and bowden cable.
1.
Disconnect battery and cover positive terminal.
Caution:
There is risk of injury from the airbag or power window regulator (comfort function)! Wait at least one minute after disconnecting the battery before
proceeding with further work.
2.
Remove door panel. Disassemble and remove inner door release handle. Refer to the 911 Carrera (996) Technical Manual, Group 7, Section 70 59
37 - Disassembling and assembling door trim panel.
2.1
Fit the new inner door release handle onto the door panel.
3.
Remove molded foam piece from the inside of the door in the area of the door lock.