911 Carrera Cabriolet (996) F6-3.4L (1999)
1
-
Removing tension strap at the main bow
1. Unscrew Torx screws T 10 -1- from the fabric pocket on the main bow.
2. Move fabric pocket and disengage the tension spring from the tension strap -Arrow A-.
2
-
Removing tension bow seal
-
Unscrew T25 -2- Torx screws on left and right sides from the tension bow seal and pull out of the groove of the tension bow.
3
-
Removing convertible-top covering at the tension bow
1. Remove seal from the groove of the tension bow -in direction of arrow A-.
2. Detach convertible-top covering from the groove in -direction of arrow B-.
4
-
Removing tension cable on convertible-top covering
-
Unscrew the Torx screw T25 -4- from the tension cable eyelet -3-.