911 Carrera Cabriolet (996) F6-3.4L (1999)
6. Undo the two inner screw-type hose clamps -arrows- and turn the throttle body upward.
7. Remove the oil filter housing.
8. Undo the throttle potentiometer. Unscrew the two cross-recess screws -arrows- for this purpose. Carefully take off the throttle potentiometer.
Installing Throttle Potentiometer
NOTE: Always replace the sealing ring of the throttle potentiometer.
1. Push the throttle potentiometer onto the throttle axle. Put on and tighten the two cross-recess screws.
2. Install the oil filter housing.