911 Carrera Cabriolet (996) F6-3.4L (1999)
-
Air conditioning
You can use this menu to code the
with/without
navigation module in accordance with the air-conditioning system equipment.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Navigation' in the PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the Navigation function selection and confirm with the [>>] key.
-
Select 'Air conditioning with/without' in the Navigation coding function selection and confirm with the [>>]
key.
-
Select "Air conditioning with/without" corresponding to the equipment in the Modify navigation coding
function selection and code with the [F8] key.
-
Country coding
You can code the country code using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Navigation' in the PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the Navigation function selection and confirm with the [>>] key.
-
Select"Country coding" in the Navigation coding function selection and confirm with the [>>] key.
-
Select"the relevant country coding" from the menu item that is displayed and code it with the [F8] key.
-
PCM2 code
You can use this menu item to code the PCM2 code after replacing the PCM2 GW.
-
Connect and start the 9588 Porsche System Tester II and switch on ignition
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) Navigation function selection and confirm with the [>>] key.
-
Select 'PCM2 code' in the 911 (996) Navigation coding function selection
-
and confirm using the [>>] key.
-
Take the PCM2 code from 'IPAS', enter it in the mask and code it with the [F8] key.
-
Tyre width
You can code the tyre width using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) Navigation function selection and confirm with the [>>] key.
-
Select 'Tyre width' in the 911 (996) Navigation coding function selection - and confirm using the [>>] key.
-
Select 'the required value' in the menu that is displayed and code it with the [F8] key.
-
Tyre condition
You can code the tyre condition as required using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) Navigation function selection and confirm with the [>>] key.
-
Select 'Tyre condition' in the 911 (996) Navigation coding function selection - and confirm using the [>>] key.
-
Select 'the relevant condition' in the menu that is displayed and code it with the [F8] key.
-
Summer/winter time
You can code the summer/winter time using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the Navigation function selection and confirm with the [>>] key.
-
Select 'Summer/winter time' in the Navigation coding function selection and confirm with the [>>] key.
-
Code the required option with the [F8] key.
-
Time
You can code the current time using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
-
Select 'Coding' in the Navigation function selection and confirm with the [>>] key.
-
Select 'Time' in the Navigation coding function selection and confirm with the [>>] key.