911 Carrera Cabriolet (996) F6-3.4L (1999)
/f6-3.4l/Page-1127001.png)
Control Arm: Service and Repair
Removing and Installing Front Axle Strut
Removing and Installing Front Axle Strut
Tools
Removal
1. Lift the vehicle. Remove wheel.
2. Undo axle strut to wheel carrier. While doing so, counter with screwdriver (Torx T40) 9546 . Then press off ball joint using press-out tool 9560.
To prevent damage to the rubber sleeves of the ball joint, coat the rubber sleeves and the press-out tool in this area with tyre mounting paste.