911 Carrera Cabriolet (996) F6-3.4L (1999)
1. Remove center console.
2. Lift shift console cover up and off.
3. Move shift lever to neutral position and fix shift lever with special tool 9619.
4. Disengage the selector and shift cables on the shift console. To do this, slide the locking sleeves (6) forward as far as they will go and turn
clockwise to removal position.
1 - Selector cable (blue)
2 - Shift cable (black)
3 - Adjuster open
4 - Adjuster closed
5 - Support bracket
6 - Locking sleeve
5. Disengage support bracket sleeves (5) on the shift console. To do this, release the support bracket sleeves and carefully pull out of the support
bracket.
6. Remove parking brake console.
7. Remove underbody panel (middle and rear).
8. Disengage shift and selector cables on the transmission:
1 - Selector cable (blue)
2 - Shift cable (black)