911 Carrera Cabriolet (997) F6-3.6L (2007)
Central Control Module: Service and Repair
Removing And Installing Gateway Control Unit
Tools
Preliminary work
Preliminary work for gateway control unit
Cover of driver's footwell.
Remove relay carrier 1.
Remove vehicle electrical system control unit.
General warning notes
General warnings for gateway control module
WARNING:
Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
-
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
Removing gateway control unit
INFORMATION: The gateway control module is located under the radiator tank, accessible from inside the vehicle near to the driver.
WARNING:
Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
-
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.