911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-829002.png)
1. Unscrew sheetmetal screws -3- and fastening screws -1-, rear bumper -2- or (USA/Canada version) -2A- with the mounted centre heat shield -4- in
a downward direction.
2. Unscrew fastening screws -5-, remove lower centre heat shield -4- and rear support -7-. Disassemble rear support -7- by unscrewing the fastening
screws -6-. Remove connecting angle -8- and sheetmetal nuts -9-.
Removing centre heat shield
1. Screw off fastening nuts -1- and remove centre heat shield -2-.
Removing heat shield at the sides
1. Screw off fastening nuts -1- and fastening screws -2- and remove heat shield at the sides -3-.
