911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-854001.png)
Fuel Door Release Actuator: Service and Repair
Removing And Installing Switching Element For Filler Flap
Preliminary work
Remove front right wheel housing liner (part A). Refer to Removing and installing front wheel housing liner on "Removing"
Removing switching element for filler flap
1. Release -arrow a- and pull off connector.
2. Loosen the two fastening screws -1- and remove the filler flap switching element from the holder.