911 Carrera Cabriolet (997) F6-3.6L (2007)
Trunk / Liftgate Shock / Support: Service and Repair
Removing And Installing Rear Pneumatic Spring
Removing rear pneumatic spring
1. Open the rear lid.
2. A second person should hold the rear lid to prevent it from closing accidentally.
3. Insert a screwdriver -2- between the head of the pneumatic spring and the safety clip -3- -A-.
4. Release the safety clip -3- by levering the screwdriver -2- towards the pneumatic spring -B-. The safety clip remains in the head of the pneumatic
spring.
5. Pull the pneumatic spring -1- from the ball head -C-.
6. Withdraw the screwdriver.
7. Remove pneumatic spring -1-.
Removing rear pneumatic spring at the body'