911 Carrera Cabriolet (997) F6-3.6L (2007)
1. Remove end plate. Refer to Replacing end plate on "Removing"
2. Remove floor front section. Refer to Replacing floor front section on "Removing"
3. Milling off spotwelds
3.1. Mill off spotwelds in areas -A, B, C- using a spotweld cutter.
4. Separating spotwelds
4.1. Separate spotwelds in areas -A- and -B- using a parting grinder.
5. Milling off spotwelds
5.1. Mill off spotwelds in areas -A- and -B- using a spotweld cutter.